Clay Cutter Details

 

Welcome to Fantasy Workshop, you are looking at the Pro-Clay Cutter, this tool was originally designed for the Special Effects mould making, used by some of the best mould makers in the industry, and is possibly the most accurate cutter available on the market, constructed of high grade aluminium very tough and easy to use, just rotate the twist clamps anti clockwise on either side of the cutter slide the centre rail away from the cutting wire to the required thickness on the gauge pillars and then re lock the two twist clamps clockwise, remember not to over tighten the claps then just draw the cutter across your block of clay.

 

Maintenance of Pro Clay Cutter

After every use give the pillars a wipe over with a damp cloth to stop the build up of dried clay on the pillars which can hinder the sliding action of the twist clamps on the pillars, also to improve sliding action if that becomes a bit stiff, un screw the twist clamps completely slide them up the pillars and add a little talc to both rubber O rings this keeps them lubricated, then slide the twist clamp caps back down and re-tighten.

Whether you are a hobbyist or professional and you work with clay you will find the Pro-Clay Cutter a must have addition to your tool box.

 

PAGE UNDER CONSTUCTION

PLEASE CONTACT ME IF YOU ARE INTERESTED

IN A PRO-CLAY CUTTER

Copyright © All Rights Reserved

All products are protected by intelectual property rights 2001